Besiege: Mastering Flight

Ready to conquer the skies in Besiege? Welcome to 'Besiege: Mastering Flight', your ultimate guide to becoming an aerial engineering genius. Whether you're a novice builder or a seasoned player, this comprehensive guide will take you through the exhilarating process of creating and perfecting flying machines. Explore essential techniques in 'Designing Flying Machines', find out the best ways of 'Using Balloons and Wings', and become proficient at 'Controlling Airborne Vehicles'. Learn the delicate art of 'Balancing Lift and Weight', and steer clear of the 'Common Mistakes to Avoid'. Dive in and start your journey to aerial mastery in Besiege!

Besiege: Mastering Flight

Designing Flying Machines

So, you want to take to the skies in Besiege. It’s not as impossible as it seems. With the right mix of parts and a bit of creativity, you can design flying machines that are both effective and fun. Here’s a breakdown of what you need to know to get airborne.

Picking the Right Parts

Before building, let's talk about the parts crucial for flight. You'll be using primarily these:

• Wings: Provides lift. Without them, you're not flying.
• Propellers: Provides thrust to move forward.
• Steering Hinges: Needed for in-flight adjustments.
• Ballasts or Weights: Helps balance your machine.
• Flying Blocks: Helps with additional lift and control.

Building the Frame

Start simple. Your frame will be the skeleton of your flying machine, so it needs to be sturdy and balanced. Here are some tips:

• Symmetry is your best friend. Balance is everything in flying, so make sure both sides of your machine are mirrored.
• Compact Designs: Keep it small at first. Too many parts make it unmanageable in the air.

Pro tip: Use wooden blocks for a lightweight frame.

Adding Lift and Thrust

To get off the ground, you'll need a combination of lift and thrust.

• Lift: Attach wings to either side of your frame. The more wings, the more lift, but be careful not to overdo it.
• Thrust: Propellers go at the back of your machine. Start with two and add more if needed.

Balancing Act

Balance is crucial. Even the slightest imbalance can send your machine spiraling.

• Ballasts: These are perfect for counteracting uneven weight. Attach them to areas that seem lighter.
• Weights: Attach weights carefully to keep your machine level. Use trial and error to find the perfect balance.

Control and Maneuvering

Once you’re in the air, you need to steer your machine. Here’s how:

• Steering Hinges: Attach these to your wings to change their angle in flight.
• Flying Blocks: Use these for additional control. They can act as mini wings, stabilizing your machine.

Testing and Tweaking

Time to take your creation for a test flight. Don’t get discouraged if it crashes immediately. That's part of the learning process.

• Test in Incremental Steps: First, see if it can lift off. If it can’t, either add more wings or reduce weight.
• Check for Stability: Does it fly straight? If not, adjust your ballasts and weights.
• Control Response: Are you able to steer effectively? Tweak your steering hinges until you get a smooth response.

Advanced Tips

Once you get the hang of basics, try these advanced concepts:

• Rotors for Hovering: Attach rotors to allow your craft to hover in place. They give precise control but are trickier to balance.
• Multiple Propellers: Use multiple propellers for greater speed and maneuverability. Just ensure they're all balanced to avoid unwanted spinning.
• Weaponizing: Add cannons or flamethrowers for an offensive edge, but remember, added weight affects balance.

Troubleshooting

Are you still having trouble? Here's some common issues and solutions:

• Nose Diving: Move weight or ballasts toward the back.
• Spinning Out: Balance your weight and make sure propellers are symmetrical.
• Can’t Lift Off: Either reduce weight or add more wings.

Conclusion

Designing flying machines in Besiege is a mix of art and science. Start simple, balance carefully, and don’t be afraid to experiment. After a few tries, you’ll be soaring above your enemies, ready to rain down destruction. Happy flying!

Besiege: Mastering Flight

Using Balloons and Wings

So you’ve conquered the ground and are looking to take to the skies in Besiege? Awesome! Whether it’s reaching those high-up objectives or just wanting to create the coolest flying machine, balloons and wings are your best friends. Let's dive in and learn how to make your contraptions soar!

Balloons: The Simple Lift-Off

Getting Started with Balloons

Balloons are the easiest way to get lift in Besiege. Here’s a quick rundown on how to use them effectively:

1. Place Balloon Blocks: Find the balloon block in the toolbar and attach it to your machine.
2. Balance is Key: Bubbles need to be placed evenly--make sure your contraption isn’t too lopsided, or it’ll be a wobbly ride.
3. Tethering: Balloons can be tethered to different parts of your machine. Think about where you need the lift and attach balloons accordingly.
4. Adjust Balloon Strength: You can tweak the lift by adjusting the balloon’s properties. Higher strength gives more lift but can make your machine harder to control.

Pro Tip: If your machine is too heavy, adding more balloons can help, but too many and it might float away uncontrollably. Finding the balance is crucial.

Wings: Glide Gracefully

Getting those Wings in Place

Wings are perfect for more controlled and graceful flight. Here’s how to get started:

1. Attach Wing Panels: Similar to balloons, the wing panels are found in the toolbar. Attach them symmetrically on both sides of your machine for balanced flight.
2. Add Control Surfaces: Use control surfaces like hinges or steering hinges to adjust the angle of the wings. This allows you to change direction and altitude.
3. Use Propellers: Wings work better with a bit of forward or upward thrust. Use propellers to give your machine that extra push.
4. Aerodynamics Matters: Make sure your design is aerodynamic. Think about how real plane wings are shaped--smooth and sleek is the way to go!

Pro Tip: Steering hinges attached to wings can serve as ailerons, helping you roll and bank your craft just like an actual airplane. Setting up proper controls for these is key to mastering flight.

Advanced Tips: Combining Balloons and Wings

Once you’re comfortable with the basics, try combining balloons and wings for more complex flight mechanisms:

• Stability with Balloons: Use balloons for vertical lift and wings for horizontal movement. This combo can result in highly stable and controlled flight.
• Directional Control: Attach steering hinges to both the balloons and wings. Balloons can help keep altitude steady while wings handle the steering.
• Power and Propulsion: Incorporate cannons or rocket thrusters for extra propulsion. This can make your machines faster and more versatile.

Final Thoughts

Getting your machine to fly in Besiege can be a lot of trial and error, but that's part of the fun! Experiment with different setups and adjust as needed. Remember, the key to good flight is balance and control. Happy flying!

If you’re having trouble or need inspiration, check out some online builds from other players. Seeing how others achieve flight can give you ideas and insights for your own creations.

Good luck, and may your machines soar high in the skies of Besiege!

Besiege: Mastering Flight

Controlling Airborne Vehicles

Creating a flying machine in Besiege might seem hard at first, but with a little guidance, you’ll be ruling the skies in no time. This section will help you understand the basics of controlling airborne vehicles, from balancing them to precise maneuvering.

Building Your Flying Machine

Before you can control a flying vehicle, you need to build one. Start small, with a basic design. The following components are essential:

• Main Frame: The body of your vehicle.
• Wheels/Spinners (Optional): For takeoff.
• Wings/Propellers: For lift.
• Steering Hinges/Ballasts: For stability and maneuverability.
• Cannons/Bombs (Optional): For destruction.
• Flying, Adjustment, and Powered Blocks: For movement and control.

Achieving Lift

Lift keeps your vehicle in the air. The most common ways to achieve this in Besiege are:

1. Flying Blocks: These are blocks like flying spirals or balloons that generate lift.

   • Tip: Make sure to use flying blocks evenly to keep your vehicle balanced.

2. Propellers: Attach them in a forward-facing direction to generate thrust, and set them to rotate using arrow keys or any other keys you prefer.

   • Tip: Regularly check and adjust the torque settings to ensure stable flight.

3. Wings: Use aerodynamic wings for lift. Ideally, place them on either side of the vehicle for symmetry.

   • Tip: Tilt the wings slightly using the hinge tool for better control.

Controlling Your Flight

Once you've got the basics down, it’s time to control your airborne vehicle. There are a few key areas you need to focus on:

1. Stability: This is crucial. Use ballasts to balance weight, or gyroscopes to maintain orientation.

   • Tip: Test fly your machine frequently to find the best places to put your ballast.

2. Thrust Management: Control how much thrust you need for different maneuvers.

   • Increase thrust to gain altitude.

   • Decrease thrust to lower altitude.

   • Tip: Map thrust controls to easy-to-reach keys.

3. Directional Control: Use steering hinges or wheels to change direction.

   • Tip: Place hinges strategically to avoid having too many controls.

Tricks for Advanced Control

1. YAW, PITCH, and ROLL: These three controls will allow more fine-tuned movements.

   • YAW - Rotating left and right.

   • PITCH - Tilting up and down.

   • ROLL - Rolling side to side.

   • Tip: Use smaller adjustments on hinges and consider dedicated controls for each to finely tune your vehicle.

2. Adjustable Ballasts: Attach adjustable weights that you can modify mid-flight for adaptability.

   • Tip: Use light adjustable ballasts to avoid overwhelming your vehicle.

Practice Makes Perfect

The key to mastering airborne vehicles is practice. Here are a few challenges to test and refine your skills:

1. Obstacle Courses: Navigate through rings or tunnels.
2. Precision Landings: Try to land on specific targets.
3. Bombing Runs: Drop projectiles on marked areas.

Each of these challenges will improve your piloting skills and build confidence.

Final Thoughts

With these tips and a bit of practice, you'll be soaring through the skies of Besiege like a pro. Remember, every vehicle will handle differently, so tweak and adjust as needed. Happy flying!

---

Feeling stuck? Join the Besiege community forums or check out video tutorials for more creative solutions and inspiration!

Balancing Lift and Weight

Flying machines in Besiege are super fun, but getting them off the ground can be tricky. To take to the skies, you need to strike the perfect balance between lift and weight. Here’s a breakdown on how to make your creations soar without them crashing back down.

Understanding Lift

Lift is what keeps your contraption in the air. Think about it like the upward force. In Besiege, lift mainly comes from two sources: propellers and wings.

Propellers

• Small Propellers: These are great for small adjustments or lighter crafts. They don’t provide a ton of lift, but they’re easy to control.
• Large Propellers: These babies give you serious lift. If you’re building something big or heavy, you’ll need these. Just make sure your machine can handle the power.

Wings

Wings are essential for gliders or planes. The amount of lift a wing produces relies on its speed and angle.

• Small Wings: Best for smaller builds. Easy to position and adjust.
• Large Wings: Perfect for bigger or heavier aircraft. More lift means more stability but also potentially more weight.

Managing Weight

Weight is the force that pulls your craft down. It includes everything you attach to your machine, from blocks to cannons. Here are some tips to keep weight under control:

• Choice of Materials: Use lighter blocks where you can. Wooden blocks are lighter than metal ones.
• Streamline Your Design: Don’t go overboard with unnecessary parts. Each piece adds weight and can affect balance.
• Symmetry: Make sure your weight is evenly distributed. An unbalanced craft will tip and spin uncontrollably.

Finding the Right Balance

Achieving balance between lift and weight is all about experimenting. Here's a step-by-step process to get started:

1. Build the Core: Start with your main fuselage. Keep it simple and symmetrical.
2. Add Lift Sources: Attach propellers or wings. Ensure they are positioned symmetrically and consider adding multiple small propellers for better control.
3. Monitor Weight Distribution: Place crucial parts, like wheels or engines, strategically. Ensure each side mirror images the other.
4. Test Flights: After preliminary build, take it for a test flight. Adjust the position of propellers or wings to see how it affects stability and lift.
5. Fine-Tuning: Add or remove elements based on your flight tests. Sometimes, smaller tweaks make huge differences.

A Few Quick Tips

• Center of Mass: Place your center of mass slightly behind the center of lift. This setup ensures your craft is a bit nose-heavy, aiding in stability.
• Control Surfaces: Add smaller wings or fins to help with steering and stabilization.
• Weight Adjustments On The Go: Use ballast blocks to tweak your weight if your craft is tipping.

Troubleshooting Issues

1. Spinning/Tipping: Check symmetry and weight distribution. Reposition propellers or add counterweights.
2. Not Enough Lift: Add more propellers or wings. Double-check your current lift sources for efficiency.
3. Too Slow: If your craft isn’t moving forward, you might need more forward thrust. Use propellers or add more powerful thrust blocks.

Final Thoughts

Balancing lift and weight can feel like a tricky puzzle, but with some patience and testing, you’ll get the hang of it. Keep experimenting, make small adjustments, and soon you’ll be crafting amazing flying machines that stay airborne as easy as riding a bike.

Happy building, and enjoy the skies!

Common Mistakes to Avoid

So, you've got your gears, wheels, and wings ready to go. You've followed some tutorials and built a few machines, but things aren’t quite taking off as you hoped. Let’s break down some common mistakes to avoid when playing Besiege, especially when you’re looking to master flight.

Over-complicating Your Design

It’s tempting to add every fancy part and weapon you can find, but simplicity is often your best friend. Complicated designs can become unwieldy and difficult to control. Start simple and only add what’s necessary. Test your design frequently to make sure it’s still functional.

Tip: Begin with a basic frame and add one feature at a time. Ensure each addition actually improves your machine.

Skipping the Balance Check

Balance is crucial. If your creation is even slightly off-balance, it could end in disaster. Always check your machine’s center of gravity. Uneven weight distribution can cause your flyer to spin out of control or nose-dive.

Tip: Use symmetry to your advantage. Place heavy parts like cannons or armor evenly around your machine to maintain balance.

Ignoring Aerodynamics

When it comes to flight, aerodynamics matter. If your machine has too much drag or isn’t streamlined, it'll struggle to get off the ground. Wings and aerodynamic blocks should be your go-to items.

Tip: Keep an eye on the wind and adjust your machine to cut through it more efficiently. Use streamlined blocks to reduce air resistance.

Forgetting to Test Controls

It's crucial to test the controls of your machine frequently. Make sure that your flyer responds well to inputs. If your machine is slow to turn or ascend, it might not be your design that’s the problem but rather your control configuration.

Tip: Assign control keys thoughtfully. Make sure that your keys aren’t too scattered, so you can react quickly during a flight.

Underestimating the Importance of Power

Not having enough power is a common pitfall. Sometimes, your machine might look perfect but can’t generate enough lift. Make sure you have sufficient engines or propellers to get your creation airborne.

Tip: Don’t skimp on engines. It's better to have more power than you think you need. You can always scale back if it’s too much.

Forgetting about the Terrain

The terrain you’re launching from can make a big difference. If you’re attempting to take off on uneven or rocky ground, your machine may struggle. Find a flat, even surface for better results.

Tip: Build a simple mobile launch pad to ensure you have a smooth, even starting point every time.

Not Saving Progress Regularly

There’s nothing worse than perfecting your design and then having the game crash, or accidentally clicking the wrong button and losing your work. Save your progress often to avoid any heartache.

Tip: Use different save slots. Create a new save after making major changes to your machine so you can easily revert back if needed.

Ignoring Tutorials and Community Builds

You’re not alone in this battle for aerial supremacy. Don’t ignore the many tutorials and community builds available. You can learn a lot by seeing how others have overcome the same challenges you’re facing.

Tip: Spend some time on forums and the Steam Workshop. Downloading and studying other successful builds can offer new insights and techniques.

By avoiding these common mistakes, you’ll be well on your way to mastering flight in Besiege. Remember, every successful flight starts with a solid, well-thought-out design. Keep testing, keep tweaking, and most importantly, have fun!

Happy building, and may your machines soar through the skies!